Killin_ix
Well-known member
Came off my 2012 Street Triple but could fit most conical clamp
$100
Here's more info:
https://www.amazon.ca/Rizoma-Conical-Handlebars-GOLD-MA005/dp/B00G2EBL6K
* Superior Italian quality and finish
* Easy to install
* Fits: Universal 29mm handlebar clamps (If your bike does NOT have a 29mm bar clamps, you will need to order Rizoma AZ402B or AZ403B)
* Rizoma Part# MA005G has a height of 30mm and 27 degrees of pull back.
* Color: GOLD
These tapered Rizoma handle bars taper from 29 mm in the mid section to 22 mm at the ends. A perfect fit for bike that have a larger diameter clamp like the Ducati Streetfigher and other modern naked bikes. They are also thicker walled to reduce vibration transfer from the engine and makes for a more comfortable riding experience. Great finish and beautiful anodizing will make these stand out on your bike. Add these parts and you'll have a much more comfortable ride. These are 29mm in the center, and then taper to a standard 22mm bar ends, so all universal grips and throttle tubes will fit just fine. If your bike does NOT have a "FAT" 29mm center clamp, you will need to order the Rizoma 29mm clamps. (Rizoma Part# AZ402B or AZ403B)
$100
Here's more info:
https://www.amazon.ca/Rizoma-Conical-Handlebars-GOLD-MA005/dp/B00G2EBL6K
* Superior Italian quality and finish
* Easy to install
* Fits: Universal 29mm handlebar clamps (If your bike does NOT have a 29mm bar clamps, you will need to order Rizoma AZ402B or AZ403B)
* Rizoma Part# MA005G has a height of 30mm and 27 degrees of pull back.
* Color: GOLD
These tapered Rizoma handle bars taper from 29 mm in the mid section to 22 mm at the ends. A perfect fit for bike that have a larger diameter clamp like the Ducati Streetfigher and other modern naked bikes. They are also thicker walled to reduce vibration transfer from the engine and makes for a more comfortable riding experience. Great finish and beautiful anodizing will make these stand out on your bike. Add these parts and you'll have a much more comfortable ride. These are 29mm in the center, and then taper to a standard 22mm bar ends, so all universal grips and throttle tubes will fit just fine. If your bike does NOT have a "FAT" 29mm center clamp, you will need to order the Rizoma 29mm clamps. (Rizoma Part# AZ402B or AZ403B)
Last edited: