rearset installation problem (connector won't fit)

[jonko]

Hi all,

Hoping you can give me some advice about my problem. I bought a rearset with the rear brake switch from woodcraft and went to install it. The oem brake switch comes with a male connector, but the woodcraft one is the female version of the same connector. Woodcraft tells me to chop my oem switch for the connector. I'd rather leave the oem switch alone if possible. Where can I find this connector?

The first picture shows the oem connector. It is attached to the brake switch. This is the one I want/need. The other shows the woodcraft connector. It's attached to the woodcraft brake switch...

Thanks for the help,
Jon

 

[hitman5532]

the connector is part of the wire harness (215$), you can not buy it seperate . Your gonna have to find a used one or simply cut and splice the old rearset connector onto the new one

I am presuming your refering to the f3

 

[280SQUAGGLER]

i dont see the issue, Cut the woodcraft one and modify that one ... but what ever you do dont cut the OEM wiring harness