hitman5532
The Anti-Squid
Used to build and compete car audio systems. I still have a pair of HX2 RFD2212 subs sitting in my workshop. RF hasn't made anything close to this series in a long time without spending 5 times the price.
$300
Description:
One low-frequency roar from the RFD2212 and those inferior subwoofers will be scrambling for cover. This Punch HX2 12" subwoofer is built with the famous Rockford Fosgate attitude — a no-compromises commitment to deep, powerful, and realistic bass.
The FIBERlock cone of treated cured paper is strong and light for high performance and excellent transient response. Those bass notes go down smooth, too, thanks to a durable Santoprene rubber surround that controls the cone's path for maximum excursion.
The cast aluminum frame basket reduces flex and resonance for greater accuracy, while aluminum formers allow the voice coils to dissipate heat quickly. The dual 4-ohm voice coils can be wired as a 2-, 4-, or 8-ohm load, giving you more options when hooking up your system.
Note: If you are wiring this DVC sub for lower impedance, make sure that your amp is compatible. Most car amplifiers are stable down to 2 ohms in standard mode, or 4 ohms in bridged operation.
Details:
dual 4-ohm voice coils
CONsealer gasket hides mounting screws and prevents air leaks around the frame
frequency response 26-200 Hz
power range 150-500 watts RMS (250 watts per voice coil)
peak power 1,000 watts
sensitivity 88 dB SPL
top mount depth 5-13/16"
sealed box volume 0.8-4.0 cubic feet
ported box volume 1.75-4.0 cubic feet
$300
Description:
One low-frequency roar from the RFD2212 and those inferior subwoofers will be scrambling for cover. This Punch HX2 12" subwoofer is built with the famous Rockford Fosgate attitude — a no-compromises commitment to deep, powerful, and realistic bass.
The FIBERlock cone of treated cured paper is strong and light for high performance and excellent transient response. Those bass notes go down smooth, too, thanks to a durable Santoprene rubber surround that controls the cone's path for maximum excursion.
The cast aluminum frame basket reduces flex and resonance for greater accuracy, while aluminum formers allow the voice coils to dissipate heat quickly. The dual 4-ohm voice coils can be wired as a 2-, 4-, or 8-ohm load, giving you more options when hooking up your system.
Note: If you are wiring this DVC sub for lower impedance, make sure that your amp is compatible. Most car amplifiers are stable down to 2 ohms in standard mode, or 4 ohms in bridged operation.
Details:
dual 4-ohm voice coils
CONsealer gasket hides mounting screws and prevents air leaks around the frame
frequency response 26-200 Hz
power range 150-500 watts RMS (250 watts per voice coil)
peak power 1,000 watts
sensitivity 88 dB SPL
top mount depth 5-13/16"
sealed box volume 0.8-4.0 cubic feet
ported box volume 1.75-4.0 cubic feet