Need Advice: Carbs!!

[sonny62]

I'm tryin to purchase a carb and have seen several makes and models for my KX motor. Seen some on eBay that range from the high $200 to low $100. So does it really matter what make and model it is? Will the expensive one perform the same as the low end models? If they have the same specs wouldn't it provide the same performance?

Thanks in advance,

 

[garrett]

carbs

If your running a KX 85 the Kehhin PWK28 would be the best choice. Try to find one with a NAPE needle and 3.5 slide that is the set up for the KX85
138 MAIN AND 42 PILOT second clip position. The OKO carbs work well but, the chrome can flake off of the slide. I think that I have sent you in the past. I ran a KX85 in a Aprilia rs50 chassis after building three more of these bikes for my friends two with YZ85 and one with a CR85. I installed a YZ85 in
my own bike. The YZ85 is much faster. Just some food for thought.
Also check out Spankey's guide for jetting it is a good resource. If you have any other questions feel free to hit me up. Good luck, Garrett

 

[ToraTora]

Please Work Knicely

.