BMW paralever 30mm with cutout tool

[Hank Wong]

Any BMW shaft driver owner with a paralever 30mm with cutout tool you can either loan me or teach me how to make one? I am trying to remove the rear drive.

 

[DReg350]

Hi Hank, PM motomania2007. He's one of the most knowledgable BMW guys I know. I'm a BMW chain gang guy. Got nuthin'

 

[Whodat]

I did it without one. torqued the inside bolt to spec and marked it with a crayon. Torqued the big outside nut to spec and the inside bolt never moved. Win :ride

 

[boney]

I did it without one. torqued the inside bolt to spec and marked it with a crayon. Torqued the big outside nut to spec and the inside bolt never moved. Win :ride

I had the opposite issue. The inside bolt would move when I tried to torque the outside, so I torqued the inside to spec then backed it out the right distance so that when I torqued the outside, the inside moved to the right spot to be torqued properly.

 

[Hank Wong]

found one on ebay

Thanks for the replies. I found one on ebay for $14.63. will order it.

 

[MtnRider]

I've got one but you've already ordered one!

 

[motomania2007]

Hi Hank, PM motomania2007. He's one of the most knowledgable BMW guys I know. I'm a BMW chain gang guy. Got nuthin'

Thanks!

To the OP, not sure what you are referring to I had my FD off on my R1100RT 3 times and never needed any special tool...