The Toe Cutter
Well-known member
Sold via CL!!!!
Never thought I would sell this bike, but I'm not riding it anymore and need more room in the garage. Second owner; last year of the bullet proof RFS engine and first year it came Factory 50 state street legal. No worries about the DMV pulling the plate.
Just changed oil and filters, new spark plug and checked valve clearances, new gripper seat cover.
Bike has been well maintained and never let me down. I'm religious about cleaning air filter after every ride, changing oil and filters, greasing all bearings, fork oil, etc. I have ALL RECEIPTS for work done.
Miles 9,400
Hours 390
At 6,722 miles and 245 hours sent Head to DJH for complete rebuild including Kibble white black diamond valves. New Wossner piston, cylinder Nikasil, etc.
Price is $4,800 cash and located in Northern CA (east bay area). Will include supermoto package for an additional $650 (firm) (Total $5,450) which includes BEHR rims, 320mm oversized rotor, front fender, sliders, shortened kick stand, etc.
Mods
-Stillwell revalve forks/shock and resprung shock for 175lb rider/single track (new rear progressive rate spring labeled as "-8"; stock spring is 80-250)
-Carbon Fiber FMF 4.1 slip on / Flat land racing header guard
-Vapor gauge with coolant temp, tach, two trips, miles, hours, etc.
-Nuetech tubliss system front and rear (trail side repairs with plugs and run low tire pressue)
-JD Jet kit, desmogged, Boyesen power shot accelerat pump and aftermarket fuel mixture screw; carb vent filtration system to prevent dust in carb slide area
-DJH Gold Primary Shaft Nut installed
-New style KTM headlight (plus original)
-Electric fan
-MSR Radiator braces, Acerbis front disc guard, Moose rear disc guard, TM Designs chain slider, Moose case saver
-Foldable levers, Cycra hand guards, Pro Taper EVO bar, G2 throttle tube
-CV4 radiator hoses
-Pro designs racing engine drain bolt and side filter bolt ( prevents stock allen head stripping and allows safety wiring of drain plugs for added peace of mind).
-Dirt Tricks countershaft sprocket washer
-complete set of brand new body work with graphics
-tugger straps front and rear
-Service manual, owners manual, brand new pads front and rear, clutch discs, extra sprockets, oil filters, air filters, filter skins, old instrument gauge (cracked).
Never thought I would sell this bike, but I'm not riding it anymore and need more room in the garage. Second owner; last year of the bullet proof RFS engine and first year it came Factory 50 state street legal. No worries about the DMV pulling the plate.
Just changed oil and filters, new spark plug and checked valve clearances, new gripper seat cover.
Bike has been well maintained and never let me down. I'm religious about cleaning air filter after every ride, changing oil and filters, greasing all bearings, fork oil, etc. I have ALL RECEIPTS for work done.
Miles 9,400
Hours 390
At 6,722 miles and 245 hours sent Head to DJH for complete rebuild including Kibble white black diamond valves. New Wossner piston, cylinder Nikasil, etc.
Price is $4,800 cash and located in Northern CA (east bay area). Will include supermoto package for an additional $650 (firm) (Total $5,450) which includes BEHR rims, 320mm oversized rotor, front fender, sliders, shortened kick stand, etc.
Mods
-Stillwell revalve forks/shock and resprung shock for 175lb rider/single track (new rear progressive rate spring labeled as "-8"; stock spring is 80-250)
-Carbon Fiber FMF 4.1 slip on / Flat land racing header guard
-Vapor gauge with coolant temp, tach, two trips, miles, hours, etc.
-Nuetech tubliss system front and rear (trail side repairs with plugs and run low tire pressue)
-JD Jet kit, desmogged, Boyesen power shot accelerat pump and aftermarket fuel mixture screw; carb vent filtration system to prevent dust in carb slide area
-DJH Gold Primary Shaft Nut installed
-New style KTM headlight (plus original)
-Electric fan
-MSR Radiator braces, Acerbis front disc guard, Moose rear disc guard, TM Designs chain slider, Moose case saver
-Foldable levers, Cycra hand guards, Pro Taper EVO bar, G2 throttle tube
-CV4 radiator hoses
-Pro designs racing engine drain bolt and side filter bolt ( prevents stock allen head stripping and allows safety wiring of drain plugs for added peace of mind).
-Dirt Tricks countershaft sprocket washer
-complete set of brand new body work with graphics
-tugger straps front and rear
-Service manual, owners manual, brand new pads front and rear, clutch discs, extra sprockets, oil filters, air filters, filter skins, old instrument gauge (cracked).
Last edited: