synfinatic
Wannabe Fast Guy
Way too many photos to bother with posting them here on BARF, so here's a link: https://www.synfin.net/gallery3/index.php/Misc-Stuff/SV650-Partout?page=1
I have a full bike + spares available. Lots of upgraded non-stock parts- perfect if you're looking for a race spare or upgrade. Everything listed below is for a 1st gen.
- Front end w/ AK-20 cartridges ($1200 new, has compression & rebound adjustment), captive wheel spacers, Galfer wave rotors, Galfer dual brake line setup, stock m/c and calipers, clipons, ASV shorty levers and throttle cables. Sprung for a 180# rider and valved by Catalyst Reaction. $500
- Adjustible steering dampener w/ mounting brackets. $50
- Penske double clicker sprung for a 180# rider and valved by Catalyst Reaction. SOLD
- Two rear wheels with Pirelli DOT race tires (both straight) setup for captive spacers. $150 w/ cush drives, sprocket carrier & captive spacer.
- One rear wheel without captive spacers, but with carrier/sprocket. SOLD
- Woodcraft rearsets with gear shift linkage & rear brake m/c. SOLD
- Leo Vince titanium full race exhaust, Ti can and bracket. Super light, no longer made and makes better power then the M4. $500.
- SV650 motor w/ FactoryPro clutch cover. This was a used motor I picked up after my race motor broke a crank. Unknown miles, only 1/2 season racing. Not built up. SOLD
- Denso/OEM radiator. Comes with OEM hoses. SOLD
- CDI/Ignitor. SOLD
- Modified Honda OEM CBR600RR MOSFET R/R to connect to the OEM wiring harness. Runs cooler and much more reliable then the OEM Suzuki SV650 SCR R/R. SOLD
- Blue gas tank with dent/crash damage, mounting bracket and screw on gas cap. Doesn't leak. $75
- Orange gas tank (not pictured) off a racebike. I paid $100 for it years ago. $75 If interested, LMK and I'll take it down and take some pics.
- Carburetors with choke and idle adjustment screw. SOLD
- Air box with K&N air filter $50
- BRG Racing wide mouth air filter (K&N core) $50
- OEM throttle cable. I don't remember if it's the push or pull. $5
- BRG Racing front fairing stay for Armour Bodies body work. $35
- OEM dash w/ OEM front fairing stay $100
- OEM rear subframe. $50
- Racing wiring harness. SOLD
- Seat. SOLD
- Frame with swing arm, rear brake caliper/line, axle and brackets for Armour Bodies bodywork. Salvage title. The previous-previous-previous owner signed the pink slip to sign it over, but the buyer has never signed it. I will continue the tradition and provide the uncompleted pink slip and a bill of sale. $100
- Armor Bodies bodywork. Haven't cleaned them yet or taken photos other then the one tail section. One full set (tail, upper & lower) w/ windscreen in pretty decent condition (some rash damage, but nothing too bad), painted white/blue SOLD
Another set of Armor Bodies in meh, but still usable condition with same white/blue paint job. No tail. SOLD
Yellow/black bodywork by unknown MFG. Full set (upper, lower, tail) with windscreen. Has seen better days. SOLD
If you see something you're interested in and want more pics/closeups let me know and I can make it happen. Parts are located in San Jose.
I have a full bike + spares available. Lots of upgraded non-stock parts- perfect if you're looking for a race spare or upgrade. Everything listed below is for a 1st gen.
- Front end w/ AK-20 cartridges ($1200 new, has compression & rebound adjustment), captive wheel spacers, Galfer wave rotors, Galfer dual brake line setup, stock m/c and calipers, clipons, ASV shorty levers and throttle cables. Sprung for a 180# rider and valved by Catalyst Reaction. $500
- Adjustible steering dampener w/ mounting brackets. $50
- Penske double clicker sprung for a 180# rider and valved by Catalyst Reaction. SOLD
- Two rear wheels with Pirelli DOT race tires (both straight) setup for captive spacers. $150 w/ cush drives, sprocket carrier & captive spacer.
- One rear wheel without captive spacers, but with carrier/sprocket. SOLD
- Woodcraft rearsets with gear shift linkage & rear brake m/c. SOLD
- Leo Vince titanium full race exhaust, Ti can and bracket. Super light, no longer made and makes better power then the M4. $500.
- SV650 motor w/ FactoryPro clutch cover. This was a used motor I picked up after my race motor broke a crank. Unknown miles, only 1/2 season racing. Not built up. SOLD
- Denso/OEM radiator. Comes with OEM hoses. SOLD
- CDI/Ignitor. SOLD
- Modified Honda OEM CBR600RR MOSFET R/R to connect to the OEM wiring harness. Runs cooler and much more reliable then the OEM Suzuki SV650 SCR R/R. SOLD
- Blue gas tank with dent/crash damage, mounting bracket and screw on gas cap. Doesn't leak. $75
- Orange gas tank (not pictured) off a racebike. I paid $100 for it years ago. $75 If interested, LMK and I'll take it down and take some pics.
- Carburetors with choke and idle adjustment screw. SOLD
- Air box with K&N air filter $50
- BRG Racing wide mouth air filter (K&N core) $50
- OEM throttle cable. I don't remember if it's the push or pull. $5
- BRG Racing front fairing stay for Armour Bodies body work. $35
- OEM dash w/ OEM front fairing stay $100
- OEM rear subframe. $50
- Racing wiring harness. SOLD
- Seat. SOLD
- Frame with swing arm, rear brake caliper/line, axle and brackets for Armour Bodies bodywork. Salvage title. The previous-previous-previous owner signed the pink slip to sign it over, but the buyer has never signed it. I will continue the tradition and provide the uncompleted pink slip and a bill of sale. $100
- Armor Bodies bodywork. Haven't cleaned them yet or taken photos other then the one tail section. One full set (tail, upper & lower) w/ windscreen in pretty decent condition (some rash damage, but nothing too bad), painted white/blue SOLD
Another set of Armor Bodies in meh, but still usable condition with same white/blue paint job. No tail. SOLD
Yellow/black bodywork by unknown MFG. Full set (upper, lower, tail) with windscreen. Has seen better days. SOLD
If you see something you're interested in and want more pics/closeups let me know and I can make it happen. Parts are located in San Jose.
Last edited: