dbenj
Z²Trackdays.com
SOLD!
We got this FZ-10 right when it came out in 2017. It's such a great bike that we decided to throw a bunch of bling on it and keep it for a couple of years. We haven't ridden it at all this year so time to find it a new home. There's a long list of stuff for this bike so here goes:
- 2017 FZ-10, 2515 miles, clean title in hand currently on non-op
- Stock tires with less than 50 miles
- Flashtune ECU and dyno from MCTech in Sacramento (Mike Canfield)
- Brand new 2019 R6 forks (we added Ohlins race internals to the stock forks and sold them separately to an R6 racer; I like the look of the gold forks and they work great)
- LeoVince Factory S carbon can with cat eliminator mid pipe. Great sound, performance and weight savings without being obnoxiously loud.
- Current generation R1 Nissin radial master cylinder
- Spiegler stainless lines with red fittings (full lines, keeps the ABS)
- R1M calipers (no real performance improvement over stock; just bling)
- Vesrah RJL pads
- Motion Pro Rev2 Throttle plus Motion Pro grips
- 520 chain conversion with GYTR chain, GYTR rear sprocket and Pitbull front sprocket, all in like-new condition.
- Woodcraft frame sliders
- Woodcraft engine covers, both sides, with red sliders
- Evotech Performance Radiator guard
- Rizoma red bar ends
- Kurvey Girl red 90 degree valve stems
- Amazon mirrors with built-in blinker plus cheap-o flush mounts wired as running lights in the stock location
- Custom LED Blaster-X programmable tail light with integrated blinkers. Control switch is also wired in. I also wired in an in-line switch that disables the taillight for track days. No permanent modifications to the harness at all.
Few more notes:
- The back of the tank has some scratches on it. These were from a 2-up where the passenger had those gloves with metal knuckles. Yeah, pretty dumb. The picture looks worse than in person.
- TechSpec
- We had a quick-shifter installed with some race rearsets so the ECU is enabled but you'd have to buy your own setup to take advantage.
- You'll have to source a license plate mount before riding on the street.
- Also comes with FJ09 passenger peg brackets so you can higher or lower for your passenger.
- No crashes, no tip-overs, no issues whatsoever.
- This bike is a BEAST. Upright R1 with cruise control and a 12v outlet.
Price: $10,000. Comes with a free track day too. Buy it before mid-August and you can come to the Monday R/World event.
Available for pickup in West Sacramento or I can possibly delivery to a Z2 track day but we'd have to work that out. If you are interested or have any questions, please email me directly: david@z2trackdays.com Email is always better than phone or PM. Pics below.
--David
We got this FZ-10 right when it came out in 2017. It's such a great bike that we decided to throw a bunch of bling on it and keep it for a couple of years. We haven't ridden it at all this year so time to find it a new home. There's a long list of stuff for this bike so here goes:
- 2017 FZ-10, 2515 miles, clean title in hand currently on non-op
- Stock tires with less than 50 miles
- Flashtune ECU and dyno from MCTech in Sacramento (Mike Canfield)
- Brand new 2019 R6 forks (we added Ohlins race internals to the stock forks and sold them separately to an R6 racer; I like the look of the gold forks and they work great)
- LeoVince Factory S carbon can with cat eliminator mid pipe. Great sound, performance and weight savings without being obnoxiously loud.
- Current generation R1 Nissin radial master cylinder
- Spiegler stainless lines with red fittings (full lines, keeps the ABS)
- R1M calipers (no real performance improvement over stock; just bling)
- Vesrah RJL pads
- Motion Pro Rev2 Throttle plus Motion Pro grips
- 520 chain conversion with GYTR chain, GYTR rear sprocket and Pitbull front sprocket, all in like-new condition.
- Woodcraft frame sliders
- Woodcraft engine covers, both sides, with red sliders
- Evotech Performance Radiator guard
- Rizoma red bar ends
- Kurvey Girl red 90 degree valve stems
- Amazon mirrors with built-in blinker plus cheap-o flush mounts wired as running lights in the stock location
- Custom LED Blaster-X programmable tail light with integrated blinkers. Control switch is also wired in. I also wired in an in-line switch that disables the taillight for track days. No permanent modifications to the harness at all.
Few more notes:
- The back of the tank has some scratches on it. These were from a 2-up where the passenger had those gloves with metal knuckles. Yeah, pretty dumb. The picture looks worse than in person.
- TechSpec
- We had a quick-shifter installed with some race rearsets so the ECU is enabled but you'd have to buy your own setup to take advantage.
- You'll have to source a license plate mount before riding on the street.
- Also comes with FJ09 passenger peg brackets so you can higher or lower for your passenger.
- No crashes, no tip-overs, no issues whatsoever.
- This bike is a BEAST. Upright R1 with cruise control and a 12v outlet.
Price: $10,000. Comes with a free track day too. Buy it before mid-August and you can come to the Monday R/World event.
Available for pickup in West Sacramento or I can possibly delivery to a Z2 track day but we'd have to work that out. If you are interested or have any questions, please email me directly: david@z2trackdays.com Email is always better than phone or PM. Pics below.
--David
Last edited: