StealthSwede
Well-known member
It pains me to post this as I loved building this bike, but work schedule and life in general has made it clear consistent track days/racing aren't going to happen.
Bought bike from a student with 49 miles on the odometer. She'd dropped it at stoplight while practicing and gave up bikes on the spot. Stripped it down to engine and frame and built with 100% new parts sourced from Spears Racing and Ninja400r.com over the winter. Fully safety wired and RTV'd per AFM rulebook, water wetter, new oil and race brake fluid. Since it was done in early January I've done 1 track day (reverse west loop on T-hill) for a grand total of 117 miles on the odometer. So basically everything is 100% new.
Bike + parts to build the bike: $12,200
Asking price: $8,500 (yes it's a lot, but again, bike is brand new)
Photos: https://photos.app.goo.gl/YnAowApk9oGmuEwSA
Bike is painted metallic blue and black - stickers by DrippinWet can easily be removed.
ENGINE & DRIVE
- Hindle Evo Megaphone Exhaust full race system, Satin SS (includes db killer)
- Spears emission block off plates
- Barnett Clutch Spring kit
- Spears custom 415 lightweight rear sprocket
- Spears customer 415 lightweight front sprocket
- EK 415 Chain (144 link)
- Clutch assist spring
- MWR race air filter
- Spears magnetic oil drain plug
- Spears high pressure (1.6) radiator cap
CONTROLS
- Motion Pro Rev 2 Revolver adjustable throttle kit
- Vortex 7 degree clip-on kit
- Vortex adjustable rearsets (GP shift)
- Spears brake & clutch lever guards
- Spears adjustable clutch & brake levers
CHASSIS
- Ohlins NIX22 Fork cartridge insert kit (185lb rider)
- Ohlins Rear Shock (185lb rider)
- Driven axle block sliders
- Spears aluminum steering stop
- Titanium pre-drilled front brake caliper bolts
- Driven captive wheel spacers
- Pirelli Diablo Supercorsa V2 DOT race tires SC2 (110/150)
PROTECTION
- GB Engine cover set (both sides)
- Swingarm Spools
- Woodcraft Race Only Frame Slider Base Kit (1099 pucks included)
- Woodcraft sprocket toe guard ("shark fin") (still in box)
- Spears lightweight voltage regulator relocator bracket
BRAKES
- Galfer full floating wave rotor
- Galfer braided superbike 90 degree front brake line kit
- Spiegler braided rear brake line
- Ferodo CPro carbon/ceramic race pro series front pads
BODYWORK
- Spears tall racing windscreen
- Lacomoto super lightweight race bodywork
- DZUZ Fasteners
- Driven fuel cap & base
- Eazi grip tank pads
- Spears mirror covers
- Spears foam race seat
- Kawasaki carbon fiber front fender
- Mirror block off GoPro mount
- Full sticker set by Drippin Wet
ELECTRONICS (wiring harness 100% intact, no cuts)
- Dynojet PC V
- Dynojet push/pull Quick Shifter
- Clutch by-pass plug
- Woodcraft ignition key switch eliminator harness
- Kickstand by-pass plug
- Shorai LFX battery
Bike is located in Berkeley. I could deliver to Sunnyvale area during weekdays.
PM or text 415-290-6030
Bought bike from a student with 49 miles on the odometer. She'd dropped it at stoplight while practicing and gave up bikes on the spot. Stripped it down to engine and frame and built with 100% new parts sourced from Spears Racing and Ninja400r.com over the winter. Fully safety wired and RTV'd per AFM rulebook, water wetter, new oil and race brake fluid. Since it was done in early January I've done 1 track day (reverse west loop on T-hill) for a grand total of 117 miles on the odometer. So basically everything is 100% new.
Bike + parts to build the bike: $12,200
Asking price: $8,500 (yes it's a lot, but again, bike is brand new)
Photos: https://photos.app.goo.gl/YnAowApk9oGmuEwSA
Bike is painted metallic blue and black - stickers by DrippinWet can easily be removed.
ENGINE & DRIVE
- Hindle Evo Megaphone Exhaust full race system, Satin SS (includes db killer)
- Spears emission block off plates
- Barnett Clutch Spring kit
- Spears custom 415 lightweight rear sprocket
- Spears customer 415 lightweight front sprocket
- EK 415 Chain (144 link)
- Clutch assist spring
- MWR race air filter
- Spears magnetic oil drain plug
- Spears high pressure (1.6) radiator cap
CONTROLS
- Motion Pro Rev 2 Revolver adjustable throttle kit
- Vortex 7 degree clip-on kit
- Vortex adjustable rearsets (GP shift)
- Spears brake & clutch lever guards
- Spears adjustable clutch & brake levers
CHASSIS
- Ohlins NIX22 Fork cartridge insert kit (185lb rider)
- Ohlins Rear Shock (185lb rider)
- Driven axle block sliders
- Spears aluminum steering stop
- Titanium pre-drilled front brake caliper bolts
- Driven captive wheel spacers
- Pirelli Diablo Supercorsa V2 DOT race tires SC2 (110/150)
PROTECTION
- GB Engine cover set (both sides)
- Swingarm Spools
- Woodcraft Race Only Frame Slider Base Kit (1099 pucks included)
- Woodcraft sprocket toe guard ("shark fin") (still in box)
- Spears lightweight voltage regulator relocator bracket
BRAKES
- Galfer full floating wave rotor
- Galfer braided superbike 90 degree front brake line kit
- Spiegler braided rear brake line
- Ferodo CPro carbon/ceramic race pro series front pads
BODYWORK
- Spears tall racing windscreen
- Lacomoto super lightweight race bodywork
- DZUZ Fasteners
- Driven fuel cap & base
- Eazi grip tank pads
- Spears mirror covers
- Spears foam race seat
- Kawasaki carbon fiber front fender
- Mirror block off GoPro mount
- Full sticker set by Drippin Wet
ELECTRONICS (wiring harness 100% intact, no cuts)
- Dynojet PC V
- Dynojet push/pull Quick Shifter
- Clutch by-pass plug
- Woodcraft ignition key switch eliminator harness
- Kickstand by-pass plug
- Shorai LFX battery
Bike is located in Berkeley. I could deliver to Sunnyvale area during weekdays.
PM or text 415-290-6030