Bike is leaning-mobile mechanic recommendation

sj408ryder

Active member
Fellow Barfers! Its been a while and I have finally decided to get my bike up and running again. I probably need to do so basic maintenance like fluid flush and stuff like that. I low sided before I stored it in the garage and it was leaning to the right. Anyone know what the problem is? Is it a frame issue or just forks? Regardless I will need to look for a mechanic. Ive used Elskip before and he used to make house calls when my buddies and I needed work done but haven't been able to get a hold of him. Anyone know of anyone else that can come by and take a look? I would take it to a shop but I have no way of transporting the bike. Im in South San Jose.
Thanks

'02 f4i
 

madsen203

Undetermined
Leaning how so? Like air fuel mixture or physically? I'd check forks, swing arm, controls (clip on's). It's not hard to remove the tank and get a general idea of the frame. Plastics should be easy to remove as well.

Maybe someone switched the kickstand to the right side?

I'm going to go on a limb and guess bent sub frame (what holds the seat). The main frame would really have to get slammed to bend or be damaged. Sub frame is cheap and easy to r&R.
 
Last edited:

sj408ryder

Active member
Physically. When I ride with no hands it tends to go to the right instead of straight. Im hesitant to disassemble anything since I don't know what to look for.
 

El Feo

Rich Kid on LSD
I'm going to go on a limb and guess bent sub frame (what holds the seat). The main frame would really have to get slammed to bend or be damaged. Sub frame is cheap and easy to r&R.

I don't think that branch will hold your weight.

Physically. When I ride with no hands it tends to go to the right instead of straight. Im hesitant to disassemble anything since I don't know what to look for.

Thanks, Trump.:x


youtu.be/vSunBRB6-r8
 

mototireguy

Moto Tire Veteran
Lift front end from below.

Loosen fork tube pinch bolts.

Wiggle front wheel.

Check that top of fork tubes equal height.

Re tighten fork tube pinch bolts.

Report back with results.
 

Maddevill

KNGKAW
Also, when riding on most roads they crown toward the right. So, even if it's straight it's going to veer right.
 

sj408ryder

Active member
Thanks for all the info! Will try to get it done this week. Will keep you updated if I need help reassembling everything!!!
 
Top