Search results

Been sitting a long time, 40$ for both jacket and gloves to a new rider or someone in need They're not in great shape, but they'll work for a bit Jacket size 46, gloves size small Also, Older synthetic motorcycle pants, size 34 Velcro on knees for knee pucks Free with anything else 5% to...

Been sitting a long time, includes some other things that I"m pretty sure are Ex500 related Located in Outer Richmond, SF

701 Enduro oem seat for sale, light use, came off 2017 30$ OBO Wheels should work fine on a KTM or Husky, and may fit other models 90/90-21 TKC 80 Continental mounted on front 140/80-18 TKC 80 Continental mounted on rear DID Dirt Star rims Includes cush hub on rear, no rotors New, unused...

Welp, my 701 got stolen, and I don't see myself replacing it anytime soon, so up for sale is some bling that never got put on. This should be a full TI header and muffler, never fitted on my bike, just admired for it's beauty. Purchased opened, but uninstalled as I recall. Asking 700$ local...

Picked up a R1200R 1.5 year ago, love it, didn't love some of the accessories it came with. What is listed is what is for sale, nothing else. All prices are + shipping (Lower 48, probably USPS flat rate + insurance) and + 3% for Goods and Services on Paypal. Links below are what I believe the...

This does not fit a 701, it fits this rack: https://www.perunmoto.com/products/ktm-690-enduro-luggage-rack-sd 45$ I'm mostly in SF, but frequent Oakland Also R1200R stuff for sale: https://imgur.com/a/6vWLQSM Would trade for the proper one that fits the 701 rack

Hey folks, a month or more back a buddy of mine was in an incident in Oakland with the Emery-go-round bus system. He walked away with minor scratches and a few bent items on the bike. eQKllrTCYBk While I can easily acknowledge that splitting between two STOPPED buses isn't the safest...

It pains me to do this, as moto work is my decompression from my day job, but I've made a decision that I need more space and less work for the immediate future. Everything is sold AS-IS, with NO WARRANTY, and you should expect to put in at least 5 hours of work (more like 20) to verify...

Long shot I know, but does anyone in the Bay have one of these kicking around? Would love to get my roommates bike off my lift. Bought one off eBay and the seller sent the wrong one :eyeroll: I'm in SF, but have a buddy who I can bribe to bring it up this way. If it's after Sunday the 15th...

Welp, I finally got the parts for my 685 kit, and figured I should be fixing up all the other small things that are going wrong the KLR before it all gets back together. Concern number 1 is the crack that I'm pretty sure has grown over the last two years or so that I've been riding the bike...

Finally got a good axle for the Muge Histake project, and found out that both front wheels I have are warped beyond usefulness. Great. Really wanted to get this stupid project rolling this week, but also looking to spend approximately 3.50$ on a front wheel, and ideally it'll be the stock...

Finally getting around to finishing my Project: Muge His take, and the risers I'm using make the stock ninja 250 brake line too short. Anyone know of a brake line off a Japanese production bike that's between 36-40"? Bounty of a beer at a local bar of your choosing, and a ride on the death trap...

My availability is terrible, I'm in the Outer Richmond of SF, I don't particularly want to travel to drop the larger items off. I'll cut better deals for multiple items bought. Gallery: https://imgur.com/a/UDWHk Almost BNIB Leo Vince Oval Carbon fiber exhaust can/muffler, as far as I know it's...

Picked this up with some gloves about 9 months ago, hasn't been used by myself, and I believe the PO said that it was a passenger helmet that didn't get much use. There are minor dings here and there, but helmet is in good condition over all. Tag inside says it was manufactured 12/12 (December...

Probably not going to get around to fixing this, which bums me out, but was picked up with the description of running, but being low on power. PO thought it was a thrown rod, which doesn't seem to add up if you ask me. I was thinking bad rings/valves. Literally haven't done anything but move it...

Don't need to be in good shape, and the top where the bar bolts in can be broken, as long as the bottom half is good, I'm interested. Oh you want beer for them? Great. :)

Looking to borrow or buy a jigsaw to cut up some 10mm alum, I can buy blades so I don't mess up yours I'm in San Francisco

Alright, so I'm trying to hack on some MX bars to a Ninja 250 I picked up, and I want the universal bar mounts to sit flush on the top triple, bolted to the lower bolthole for the stock handlebar riser. On a pregen Ninja 250, without the stock risers there, there is a drop down ledge there...

I'm excite. Also, I didn't see anything in the first two pages, so I assume it hasn't been posted yet :X http://blog.motorcycle.com/2015/10/26/manufacturers/kawasaki/2016-kawasaki-z125-team-greens-grom-fighter-video/ EDIT: D'oh, looks like it's been around. This is what I get when I leave...

Kind of a long shot, but does anyone in the city have some thinner 29mm valve shims for a KLR/klx650? Looking for something between 2.05-2.15 If I don't hear from anyone by the morning, I think I'll spit up the 30$ at SF Moto (assuming they have Mission Motorcycles old stock) Bikes that use...