FS: 2008 Yamaha R6 Supersport/AFM Legal w/ 450 Conversion

Smitty769

Well-known member
Asking $6500 OBO - Located near Sacramento, CA

**Currently a 600**

****I have many additional pictures, can answer questions, and will entertain all reasonable offers, so please feel free to message me!****

I decided to see if anyone is interested in a good 600 or 450 racebike. I have raced it as both and it is capable at either. I just don't ride enough anymore (such is life right now) - Currently setup as a 600

Taken meticulous care of. Oil + filter changed after every race weekend and every other track day. Inspected and cleaned constantly

Here is a list of what is on the bike:

• Vortex V3 Keyless Gas Cap
• Shorai Lithium Battery
• SBS Dual Carbon Front Brake Pads
• CRG folding levers
• Spiegler Rennsport Braided brake lines front and rear
• GPR stabilizer
• Stompgrip Tank Grip Pads

• Woodcraft Throughout
Frame Sliders
Rear spools + Sliders
Bars (Renthal Fork Clamps)
Keyless start bypass
Engine case covers w/ sliders
Full rearsets w/ folding tips
Swingarm Sharkfin
Rear brake master cylinder tension spring
Front fairing mounts

• Wilbers fully adjustable Rear Shock
3 way piggyback (Hi/Low/Reb) – Sprung for rider 230# in gear

• Ohlins FGK127 25mm Fork Cartridges w/ 1.0 springs installed w/ Ohlins Fork Cap Extenders

• 2015 motor supersport build by Meen Motors (built for pump gas, and only run with pump gas) – moderate hours but still very strong – hardly ran in 2019 big reason why I am parting with it
2 AFM weekends as a 600 + 3 track days (2017)
2 AFM weekends as a 450 + 3 track days (2018)
2 track days as a 600 (2019)
Graves Carbon Exhaust
Complete Samco Silicone Coolant hose Kit (red)
Cox Radiator Guard
GBRacing Clutch Cover

• Full Bazzaz System
Z-Fi TC (Traction Control) fuel controller
QS4 Push/Pull sensor Quick Shifter (currently GP shift)
Z-AFM Self Mapping Module
TC Activation Light
TC Adjust / Map

• Driven Sprocket + aluminum sprocket nuts
• EK 3D 520GP chain
• 450 conversion available
Correct Sprocket + chain (DID ERV3 gold)
Bypass module + dummy injector

• Many spares available/included (brake pads, bars, pegs, levers, etc.)

• Front and rear Pit Bull stands available/included (front stand = dual lift, can be a fork lift or triple clamp lift)

• Warmers available/included (Woodcraft Gen III dual temp)

• Many oil filters (OEM) + oil (Motorex Synthetic) available/included
 

Attachments

  • side w fairing.jpg
    side w fairing.jpg
    114.6 KB · Views: 197
  • side no fairing.jpg
    side no fairing.jpg
    116.1 KB · Views: 168
Last edited:

UMZenki

Quick. ish.
Still interested in this bike if available. If someone can get in touch with Stephen to let him know, I’m not sure he checks this thread or pm’s
 
Top