Search results

  1. FlatulentDan

    06-07 R6 OEM bodywork

    I'm selling some 06-07 Yamaha R6 OEM bodywork Set 1: Blue/White Upper and Lowers - $300/offer Upper and lower only (no tail pieces). Decent shape, scratches on lower but all tabs are there. Headlight included. Set 2: Black 'Raven' - Complete set minus the tank - $500/offer This is the...
  2. FlatulentDan

    ***SOLD*** 1991 Suzuki GSXR400

    Suzuki 1991 GSXR400 - SOLD To the best of my knowledge, this is not an SP2 but it is supposed to have several SP2 parts. I know the Carbs are off of an SP2 and it appears the wiring harness too. It may actually be an SP2, I don't know. 31k miles CA title Engine runs good, no signs or...
  3. FlatulentDan

    FCR39 FlatSlide Carbs inline-4 (2-sets)

    I have two sets of FCR39 Flatslides for sale. $650/Each or offer. Bought for a 86 GSXR-750 project but I am going to run the stock carbs for street use. I'm only selling them to fund the purchase of a set of Mikuni (RS?) for a '90 GSXR400. e-mail is the best contact, but I should be...
  4. FlatulentDan

    1986 Honda VF1000R

    I have had this bike for about 3 years now. It is 100% stock, I am the second owner, but the first owner let it sit on a covered porch for almost 16 years. It looks pretty good now, but I have only done an extensive 'First Pass' at restoring i. Full carb rebuild (every gasket, o-ring...
  5. FlatulentDan

    1993 Honda CBR900RR

    I'm thinking about selling my 93 CBR900RR. I like it, I just don't ride it much and I need to make some room. No Longer For Sale. Mostly Original Stock - only modifications are: Brake Lines, Levers, Turn-signals (already replaced when I got it), exhaust can (Carbon Fiber TwoBrothers) and the...
  6. FlatulentDan

    SV650 Slipper Clutch - Yoyodyne

    SV650 Slipper Clutch - Yoyodyne - SOLD This slipper clutch fits all year SV650's. The clutch pack in it is from a first gen (99-02) and is in good shape. it is in excellent condition. I don't need a slipper in my current bike since i am primarily only doing Trackday instruction on it and...
  7. FlatulentDan

    TWF 'Mix-Gen' SV650 (2nd Gen Chassis w/ 1st Gen Motor/Carbs)

    As the title says, this is a mix-gen. 2003 Chassis with a first Gen motor, wiring harness, flatslides. The bike runs great and has been my 'A' bike for the past 4 seasons. Selling for $3,800. All the standards: 06gsxr front end brembo master with R6 calipers and Galfer 1300 pads woodcraft...
  8. FlatulentDan

    AFM Round 2 @ Sonoma Raceway - Who are our New Racers?

    I've talked to a few in preparation for this round, but I am curious who else out there is planning for this to be your first race weekend? If you are, and you don't already have a good support group of seasoned racers from the AFM, contact me at Mentor@AFMRacing.org and we can help get you...
  9. FlatulentDan

    2007 GSXR 750 - Track/Race bik

    This is David White's old bike, and I am helping sell it for a friend. Dave converted it to a trackbike for occasional trackdays, but never really rode it much. A fried of mine bought it and has done about 5 trackdays over the past 2 years. If you know David White you know how he builds...
  10. FlatulentDan

    2010 Fuzion 5th wheel Toy Hauler

    I think I'm selling the toy hauler. 2010, Fuzion 302 5th wheel Separate garage 2 Queen size beds in the back (electric lift to raise them when not in use) 2 slide-outs (Bedroom and Living Room) generator electric awning, stabilizers and tail gate Remote for awning, stabilizers, slide-outs and...
  11. FlatulentDan

    2001 SV650 Track Day Bike

    SOLD i am helping a friend sell a mostly stock SV650. It was set up as a track day bike but didn't see as many hours at the track as hoped. 01-03 GSX750 forks, tripple, wheel, brakes, etc. It has a race wiring harness, and race bodywork. Other than that the bike is stock. (Stock exhaust...
  12. FlatulentDan

    08 GSXR600 Production Bike

    08 GSXR 600 Lowered Price to $SOLD AFM Production Legal Race Bodywork, Woodcraft rear sets, clip-ons, PowerComander with QuickShifter and USB hub, TwoBrothers exhaust, Frame Sliders, CRG Levers, Steel front lines, etc…. Built this for my brother's first track day and I raced it one round of...
  13. FlatulentDan

    TWF on a Harley??? at Laguna Sept 27-28

    Zoran wasn't very excited until I told him they were wrapping the bike in Yellow with the TWF logo. Then he let loose a muffled giggle. The opportunity came up and I had to say yes. I'll be running one of the 'Make a Wish' bikes in the last round of the AMA XR1200 series at Laguna. I am...
  14. FlatulentDan

    1998 CBR600 F3 - Parts for sale

    Complete wiring harness with ECU Stock Rear Shock and suspension knuckle Airbox cover with snorkels Triple tree Stock Rearsets Instrument panel (with minor damage) Coils few other misc stuffs. I'll try to add prices tonight along with some pics. Email me at DanSewell@TWFRacing.com for...
  15. FlatulentDan

    Sexiest Race SV's alive.... and they are FOR SALE!

    If you are looking to buy an SV to race, why not buy one that also is a total chick magnet!!!! Either of these bikes will increase your Mojo by at least 27 points. Put them in the back of your truck and you'll have kids and old people staring at you on the freeway like you are finally the cool...
  16. FlatulentDan

    Aprilia SXV450 Forks (Triple, axel, brakes, bars)

    I bought these for a project but never installed them. they are in great shape. Complete with everything (except the top triple nut and front wheel) $600 for complete set Shipping will be around $50 to most of the US Email is the fastest (best) way to get in touch with me...
  17. FlatulentDan

    04+ SV 650 Stock Subframe (Stright)

    04+ SV 650 Stock Subframe (SOLD) 04+ Subframe (03 has Steel subframe and slightly different seat positioning) Straight $SOLD including shipping to the lower 48. Email is the fastest way to get in touch with me. DanSewell@TWFRacing.com
  18. FlatulentDan

    StreetFighter head light assy. + Black Bucket headlight

    I have two sets of head light assemblies. Dual-pod Buell head light with mounting brackets, small windscreen and small LED turn-Signals. $200 Single bucket style head light with mounting arms and brackets. (Brackets measure 53mm ID) $75
  19. FlatulentDan

    Buell Blast Low-Profile Seat

    This is the lowest profile seat sold for the Buell Blast. There is a small tear in the very front tip from a part falling on it :(. $100/offer Shipping will be about $25 Email is best: DanSewell@TWFRacing.com
  20. FlatulentDan

    Yamaha 2400i Generator

    Yamaha 2400i Generator *SOLD* Yamaha 2400i. works great. I also have a link-up cable to connect two of them I'll sell for an additional $75. Generator: $SOLD Email is best: DanSewell@TWFRacing.com Located in Reno: I can delivery to Z2 Trackday event or AFM
Top