Search results

Edit - no longer for sale, I'll keep it as a back up / street suit. Evaluated as "not road worthy" by BARF expert gear reviewers. :twofinger Dear BARF - I bought this suit here a few years ago for $300, it was thoroughly broken in (i.e., crashed) and I crashed in it a couple times since then...

I have a pair of Dainese Delta black leather pants for sale. I never wore them - bought them from a friend that also almost never wore them. They're like new, sliders untouched. In terms of fit, they are a bit too tight for me around the waist - the thigh is tight as well but that's more of a...

BARFers - clearing out some parts: - Lower triple clamp with stem - from a 1098 but fits a bunch of other Ducs, lower clamp is 53mm (will not work with Ohlins) - $200 - 1098 / 848 (came off a 848) Showa forks - radial brakes - $300 - 749 / 999 Showa forks - axial brakes - $150 - Fuel pump...

I bought this bike at the end of last year from Robert at Evolution Motorcycles. I tracked it a couple times but have since upgraded to a new track bike, so it now just sits around. Registration / Title Info : I bought the bike with no title, bill of sale only. Decided to send an information...

Hey y'all, so Z3n and I got some bike parts together and thought it would be cool to build something nutty and get some more people involved in the process for fun. The Bike(s) A good 749 with a bad engine, and a pretty bad 1198S with a good engine. Let's put it all together into a nutty...

BARFers - I'm testing waters for my 999S / 1098 build as the project pipeline starts to fill up again. Build thread is here. Basics Mileage: 14-15k have to check exact mileage, will continue to go up as the weather permits Title: Clean CA title - full disclosure: I bought it with a salvage...

Hi y'all - Got a truck, so no longer need my harbor freight 4x8 folding trailer. It has some nice wood on it that I sealed up after installing. Tires are fresh, the wheel bearings have a cap with a lube fitting, I lubed the wheel bearings with a lube gun before long trips (read that's...

SOLD I picked up this SuperHawk from a fellow BARF'er, it had dropped a valve due to a failed cam chain tensioner. I bought it as a project to swap in a new motor and ride while I finished my other bike. I ended up doing a bit more than just swapping the new motor, but am very happy with the...

SOLD SOLD SOLD Hi BARF, I am helping a friend sell his 2006 GSX-R 600. I have worked on and ridden it and am currently providing room and board for this beauty. Clean title in hand, ready to go. It has never seen the track but would be an excellent candidate for a dual-duty street / track...

Hey y'all - I bought AFM535's superchicken since I needed a daily ride that I could 2-up with. Found a donor bike with a (supposedly) working engine - hadn't been ridden in 2+ years. I trusted the guy. The BARF bike did indeed have a failed CCT and dropped exhaust valves. I'm keeping that...

I have an OEM exhaust off a 999 which was cut open and modified / gutted. Flow through design, sounds incredible. Asking $40 picked up, need it gone. Heat shield included.

Hey y'all - looking for a pair of riding leather pants, I wear a 32 (30 in some brands) and a 30-32 inseam. I have alpinestars jackets, so A* pants would be nice. Also like Dainese, but open to anything. Shoot me a PM if you're selling.

Before: After: I have a 2VSBK build, which is off waiting in the corner while I work on this new endeavor... Started as a 999S I bought from a forum member with the intention of using it as a donor for parts. But I really like the engine. So my plan is to continue working on the 2VSBK...

Hello BARF - I received this Aprilia as partial trade for another car I sold. I wasn't planning on keeping it, but have been riding it daily and loving it since. Since then I installed a new Barnett clutch and springs. Also installed a new rear tire and changed the oil and filter (all within...

My RSV-R Factory's clutch is slipping and the number of possible causes from what I have read is absurd. So wanted to see if anyone on here had first-hand experience with diagnosing these. Given that it has 22k miles, it could just be worn out plates. The clutch engagement is also at the end...

Hey Y'all, One of our room mates is moving out - so a room will be available in downtown San Jose. It's the largest of 4 rooms on the top floor, about 700-800 sq ft I'd say. The address is 643 South 6th Street in San Jose, nice house, great landlords, and moto-friendly (couple spaces in the...

Hi All - I bought a Monster 1100 Evo wheel some months back that I ended up not using for my build (went with a 748 tri-spoke wheel instead). This wheel was purchased brand new in box, it was never used - I mounted it to test fit it but has 0 miles on it. It's in brand new condition. Asking...

As reluctant as I am to sell it, I want to keep building more - so I need to make space. I'm already close to a roller / runner for my 2nd build and have enough parts to start a 3rd - so up for sale it goes. [Update Jan 5 - suspension geometry and set-up has been completed, carb tuning has...

Price: 27,000 Putting my Z06 up for sale, not in a rush - but getting more serious about selling it. I have owned this car for a bit over a year, it's the fastest thing I've ever experienced. I'm considering selling because I don't drive it much and I would like a car that is more versatile...

I pretty much always need Duc parts - 999, 749, 848, 1098, 900SS. Currently in need of rear sets for a 749 / 999 frame, clutch master cylinder for a supersport, front and rear brake rotors for a 848 / 1098 wheel.